20.1.5.12 sp3d

This element defines the 3D properties associated with a particular shape in DrawingML. The 3D properties which can be applied to a shape are top and bottom bevels, a contour and an extrusion.

[Example: Consider the following example of an sp3d in DrawingML:

<a:sp3d extrusionH="165100" contourW="50800" prstMaterial="plastic">
  <a:bevelT w="254000" h="254000"/>
  <a:bevelB w="254000" h="254000"/>
  <a:extrusionClr>
    <a:srgbClr val="FF0000"/>
  </a:extrusionClr>
  <a:contourClr>
    <a:schemeClr val="accent3"/>
  </a:contourClr>
</a:sp3d>

In this example, we see an sp3d defined which contains information defining both a top and bottom bevel, along with an extrusion and contour on the shape. The following image illustrates a shape with the applied sp3d:

end example]

Attributes

extrusionH (Extrusion Height)

Defines the height of the extrusion applied to the shape.

[Example: Consider the following example of an extrusionH in use within the sp3d element:

    <a:sp3d extrusionH="165100" contourW="50800"
    prstMaterial="plastic">
            <a:bevelT w="254000" h="254000"/>
            <a:bevelB w="254000" h="254000"/>
            <a:extrusionClr>
              <a:srgbClr val="FF0000"/>
            </a:extrusionClr>
            <a:contourClr>
              <a:schemeClr val="accent3"/>
            </a:contourClr>
    </a:sp3d>

In this example, we see a extrusionH defined as 165100. end example]

The possible values for this attribute are defined by the ST_PositiveCoordinate simple type (20.1.10.41).

contourW (Contour Width)

Defines the width of the contour on the shape.

[Example: Consider the following example of a contourW in use within the sp3d element:

    <a:sp3d extrusionH="165100" contourW="50800"
        prstMaterial="plastic">
        <a:bevelT w="254000" h="254000"/>
        <a:bevelB w="254000" h="254000"/>
        <a:extrusionClr>
          <a:srgbClr val="FF0000"/>
        </a:extrusionClr>
        <a:contourClr>
          <a:schemeClr val="accent3"/>
        </a:contourClr>
    </a:sp3d>

In this example, we see a countourW defined as 50800. end example]

The possible values for this attribute are defined by the ST_PositiveCoordinate simple type (20.1.10.41).

z (Shape Depth)

Defines the z coordinate for the 3D shape.

The possible values for this attribute are defined by the ST_Coordinate simple type (20.1.10.16).

prstMaterial (Preset Material Type)

Defines the preset material which is combined with the lighting properties to give the final look and feel of a shape.

[Example: Consider the following example of a prstMaterial in use within the sp3d element:

    <a:sp3d extrusionH="165100" contourW="50800"
        prstMaterial="plastic">
        <a:bevelT w="254000" h="254000"/>
        <a:bevelB w="254000" h="254000"/>
        <a:extrusionClr>
          <a:srgbClr val="FF0000"/>
        </a:extrusionClr>
        <a:contourClr>
          <a:schemeClr val="accent3"/>
        </a:contourClr>
    </a:sp3d>

In this example, we see a prstMaterial defined as plastic. end example]

The possible values for this attribute are defined by the ST_PresetMaterialType simple type (20.1.10.50).

[Note: The W3C XML Schema definition of this element’s content model (CT_Shape3D) is located in A.4.1. end note]